3
4
1
2
1. Place template at desired height on the wall
and mark drill holes onto the wall.
INSTALLATION
2. Drill all four holes with a 6 mm drill bit.
Drill holes deep enough so that the anchors
(when inserted) are flush with the wall.
I N S T A L L A T I O N I N S T R U C T I O N S
Please examine the central vacuum cleaner after it is unpacked for any external damage that
may have occurred during transport. If you notice any damage please contact us on our service
number located on your central vacuum cleaner. Let us know the extent of damage, date of
purchase, and serial number. You will find the serial number on the model plate on the side of
the central vacuum cleaner or on the test certificate on page 19 under “Technical Data”.
For the wall mount please use the enclosed drilling template. The wall mount should be at least
1 m up to 1.4 mm above the ground.
5
3. In the material bag you will find a seal for
the wall mount, screws, and washers you
need for installing the wall mount. The seal
must be placed between the mount and the
wall. Make sure when fastening the wall
mount that the writing “TOP” is at the top.
4. Hang the brackets on the back of the
central vacuum cleaner over the wall
mount to hang up the unit.