C A R E A N D M A I N T E N A N C E
15
Cleaning the filter
Your central vacuum cleaner is equipped with a highly effective membrane filter, with 1.37 m
2
filter surface which ensures that the exhaust air is absolutely clean. Through time it may occur
that a layer of dust will form on the filter’s surface. You will then notice a decrease in suction
power. If this occurs, the filter has to be cleaned.
The membrane filter can be hand-washed with cold water. Only when the filter is completely dry,
it can be put back into the central vacuum cleaner. Damp filters become blocked quickly.
Please disconnect the power!
1
2
1. Remove dirt container as described on
page 13.
2. Pull an empty dust bag over the edge of the
housing. Carefully draw the ties together to
seal the dust bag tight against the housing to
prevent dust or dirt escaping.
3
4
3. Loosen the wing and nut and pull the filter out
the filter holder. Then seal the dust bag.
4. Open the dust bag again and, with the filter,
pull it over a bucket of cold water. Protected
from dust, place the filter into the water and
rinse off the dust from the filter.