![background image](http://html1.mh-extra.com/html/varimixer/rv-10-vl-2/rv-10-vl-2_operating-instructions-manual_3569494009.webp)
9
T
he
r
emix
fUncTion
:
The special Remix-function is a shortcut to programming of
recipes. While the mixer is operated, all commands are stored,
and when a recipe is finished and
is pushed, it is possible
to store the entire recipe under a program number.
• There are four program numbers.
• A program cannot be deleted, but can be replaced.
• The programs are not deleted in case of no power.
How to store a program:
• First push
.
• Run the entire recipe including pauses and changes of
speed.
• Push
.
• Store the program as program No. 1 by pushing first
and then also
continuously, until the total length of
the program is shown in the timer field. The timer field
will thereafter flash
„P1“
three times.
How to run a program:
•
First a short push on
and then on
. Now
„P1“
appears in the timer field and immediately thereafter the
total length of the program will be shown. The program
is run by pushing
.
• If the speed or the time is changed, or
is pushed
when running a program, the program will be left and
the mixer must be run manually.
• It is possible to remove the safety guard while running
a program. When the safety guard is reattached, the
program can be resumed by pushing
.
• If the program is containing a pause, the mixer will stop
and at the same time an acoustic signal is heard. When
the operator wants to restart the mixer, push
and
the program will be resumed.
c
hanGe
of
fixed
speeds
:
For the fields
and
it is possible to change the speed
for future mixing jobs. Push
or
to adjust the speed up
or down.
If required to store the adjusted speed, push
or
until two
beeps are heard and the diodes of the speed indicator are flash
-
ing. The adjusted speed has now been stored in the memory.
To return to the factory settings for button
and
push
and
simultaneously, until a beep is heard.
r
eseT
of
Timer
:
The timer can be reset by simultaneously pushing
and
.
If the timer is reset while the mixer is running, the mixer
will stop.
Recommended max. speeds for attachment drive (fac-
tory setting).
o
verloadinG
:
The mixer must not be overloaded.
Possible overload situations:
•
Working with excessively tough and heavy
dough
•
Mixer tool exceeding the recommended
speed
•
Wrong mixer tool being used.
Larger lumps of fat or chilled ingredients must
be reduced before they are placed in the bowl.
Prolonged overloading will cause the frequency converter
to stop the machine.
,
or
will be displayed in the timer
field; the speed will not be reduced, but the mixer will stop
and the display will change to
. Follow the descrip-
tion under
Procedure in case of overloading.
p
rocedUre
in
case
of
overloadinG
:
Remove the cause of the overloading, e.g. empty the bowl.
•
Push emergency stop
•
Release emergency stop.
•
Start the mixer by pushing
.
r
ecommended
max
.
speeds
:
r
ecommended
max
.
speeds
for
aTTachmenT
drive
:
Recommended max. speeds (fac tory setting).