Varimixer ERGO100, Руководство по эксплуатации

Страница: 5 / 24

5
C
ontrol
P
anel
Vl4:
Bowl up
To raise the bowl, press
the
+ +
fields
simultaneously and con-
stantly until the bowl
reaches the top.
Start/Stop
Bowl down
Lowers the bowl once the
mixer has stopped. If this
field is activated while the
mixer is running, the bowl
will be lowered auto-
matically when the mixer
stops.
Pause
Must always be used when inspecting the product in the
bowl. Also used to reset the control system; see
”Reset-
ting the control system”, page 9 .
Time up
Used to set operation time. The time can be set before/
after starting the mixer and can be changed while the
mixer is running.
Text field / display
Displays operation time,
programme numbers and
error codes from the motor
and frequency transformer
Time down
Used to set operation time.
The time can be set before/
after starting the mixer and can
be changed while the mixer is
running.
Fixed speeds
Four pre-defined speeds.
Speed indicator
Displays the running speed
of the mixer.
Speed down
Used to change speed while
the mixer is running.
Speed up
Used to change speed while
the mixer is running.
REMIX
Used to store a recipe.
See the section
”REMIX
function”.
r
emIx funCtIon
:
The special Remix-function is a shortcut to programming
of recipes. While the mixer is operated, all commands are
stored, and when a recipe is finished and
, is pushed,
it is possible to store the entire recipe under a program
number.
•
There are 20 program numbers: 1, 2, 3, 4 - 11, 12, 13,
14 - 21, 22, 23, 24 - 31, 32, 33, 34 - 41, 42, 43, 44
•
A program cannot be deleted, but can be replaced.
•
The programs are not deleted in case of no power
How to store a program:
Program number 12 in this example
•
Start by pressing .
•
Run the whole recipe, including pauses, changes of
speed and automatic lowering of the bowl.
•
Press to stop the mixer.
•
Keep depressed; the display shows .
•
Continue pressing and press and as well,
is shown on the display
•
Release and the program will be stored as number
12
How to run a program:
Program number 12 in this example:
•
First a short push on and then on and .
Now
appears in the text field and immediately
thereafter the total length of the program will be shown.
The program is run by pushing
.
• If the speed or the time is changed, when running a
program, the program will be left and the mixer must
be run manually.
• If
is pressed while a program is running, the mixer
stops and quits the program .
• If the safety guard is opened while a program is running,
the mixer stops and will be displayed. When the
safety guard is closed again, press
; twice; the first
press eliminates the error code and the second press
starts the mixer –
the program quits .
• If the program is containing a pause, the mixer will stop
and at the same time an acoustic signal is heard. It is
now possible to lower the bowl and open the safety
guard. When the operator wants to restart the mixer,
push
and the program will be resumed.