KÄYTTÖOHJEET
39
87-900-870-01 (E)
Valvojan 969-9506 vasen ja oikea paneli
KÄYTTÖTOIMENPITEET
Valvojan päälle pano ja pumpun käynnistys
Valvojan päälle panemiseksi ja pumpun
käynnistämiseksi riittää sähköjännitteen kytkeminen
kytkimeen P17.
Pumpun pysäyttäminen
Pumpun pysäyttämiseksi b7 on kytkettävä
hyppyjohtimella a5 kanssa, joka on sijoitettu
kytkentäliittimelle P17 tai painettava Hand Held
Terminalin STOP-painiketta, mikäli valvoja on
konfiguroitu FRONT-tavalla.
HUOLTO
Turbo-V 70-sarjan valvojat eivät kaipaa minkäänlaista
huoltoa. Mahdolliset valvojaan tehtävät toimenpiteet
tulee jättää aina valtuutetun henkilön tehtäviksi.
Toimintahäiriön sattuessa on mahdollista käyttää
Varianin korjauspalvelua tai "Varian advance exchange
service"-palvelua, jolloin on mahdollista vaihtaa
rikkoontunut valvoja ladattuun valvojaan.
!
Ennen minkätahansa valvojaan tehtävän toimenpiteen
suorittamista irroittakaa sähkökaapeli pistorasiasta.
Mikäli valvoja täytyy romuttaa, toimikaa sen
hävittämisessä kansallisten säädösten ja normien
määräävällä tavalla.
HÄVITTÄMINEN
Pakkausmerkinnöissä olevan WEEE-logon merkitys
Alla näkyvä merkki on lisätty pakkaukseen EY:n ns.
WEEE-direktiivin mukaisesti.
Merkki
(koskee ainoastaan Euroopan Unionin
jäsenmaita)
tarkoittaa, että tuotetta EI saa hävittää
tavallisen kotitalous- tai teollisuusjätteen mukana, vaan
se on toimitettava erilliseen keräyspisteeseen.
Loppukäyttäjää kehotetaan sen vuoksi ottamaan
keräys- ja hävittämisprosessia varten yhteyttä laitteen
toimittajaan, olipa se sitten laitteen valmistaja tai
jälleenmyyjä, tarkastettuaan ensin kaupan
sopimusehdot.
VAARA!
Vasen paneli
Oikea paneli