ProStar 701 Fraction Collector Control Manual
- 13 -
03-914947-27:2
Serpentine Unidirectional
Define in the
Flow delay
field
the time delay (in seconds)
between when a peak is sensed and when the collection valve
is activated. This option is available only if
Slope
or
Level
options are checked in the
Fraction Collection Mode
sub-
section. The values run from 0 to 3559 sec.
Define in the
Collection Option
list where the peaks and non-
peaks are sent:
Peaks =Rack1&2; Non-peaks= Valve
Peaks =Rack1&2; Non-peaks= Drain
Peak/Non-peaks=Consecutive tubes
Uploaded.
The Uploaded entry is the entry that is entered into the front
panel of the fraction collector. This allows the use of collection
options that cannot be sent to the fraction collector. If this is
selected, the collection option in the fraction collector will be
used.
