ProStar 335 Photodiode Array Detector Control Manual - 47 -
Click on the
button to reset the D2 Lamp On Time
when a new lamp is installed in the instrument.
Click on the
button to reset the Vis Lamp On Time
when a new lamp is installed in the instrument.
Overview Window
Click on the
button: the Status Overview window is
displayed and contains three tabs:
General: displays the synopsis of the instrument, where
some current values can be read (State of the lamps,
Wavelength, Correction, etc.).
The lights indicate the state of the detector. Red light
indicates if a fault has occurred.
The current wavelength is displayed.
Click on the
button the start the autozero of the
detector.
