Varian HS452, Инструкция по эксплуатации

Страница: 30 / 45

TECHNICAL INFORMATION
IP44 Accessory kit use
1. Remove the spring bracket mounted on stan-
dard IEC socket.
2. Insert the “D” rubber plate (item 1) into the
pump’s IEC main socket pushing it till the so-
cket bottom.
3. Screw down the two brackets spacers (items
2) on the standard IEC socket spacers
4. Insert the main cable plug.
5. Fix the main cable plug by using the bracket
and screws/washers (item 3).
6. Exchange the 9 pin “D” mating connector plas-
tic shells with the IP44 shells (items 4) con-
tained in the IP44 accessory kit (see the
following figure).
,
WARNING!
To obtain the IP44 protection level you must set up
the pump electrical connections as highlighted in
the following figure.
NOTE
You must exchange the 9 pin “D” mating connector
shells with the IP44 version even if you have no
cable wired on the connector. In that case you
have to use the plastic cap as showed in the fol-
lowing figure.
ACCESSORIES
PART NUMBER DESCRIPTION
949-9390 GP Oil 1 L. bottle
949-9395 Smart Pump Oil mist
eliminator
949-9392 Smart Pump Exhaust filter
949-9376 Smart Pump Oil return kit
949-9382 Smart Pump major main-
tenance kit
949-9371 Smart Pump minor main-
tenance kit
949-9367 Smart Pump IP44 acces-
sory kit
949-9396 Power cable EU
949-9397 Power cable US
949-9398 Power cable UK
949-9399 Power cable IEC320
25 87-900-978-01(D)