TECHNICAL INFORMATION
6
9
87-900-869-01 (
D
)
TURBO-V 70 CONTROLLER DESCRIPTION
The controller, factory set for 120 Vac, 50-60 Hz input
voltage, is a solid-state frequency converter which is
driven by a single chip microcomputer and is
composed of:
−
Power
transformer
−
Left panel with input/output connector, mains
socket, forepump and vent coil output, fan
connector
−
Right panel with pump connector and hand-held
terminal connector.
−
PCB including: power supply and 3-phase output,
analog and input/output section, microprocessor
and digital section, display and keyboard circuits.
The power supply converts the single phase
(50-60 Hz) AC mains supply into a 3-phase, low
voltage, medium frequency output which is required to
power the Turbo-V pump.
The microcomputer generates the variable output
frequency and controls the 3-phase output voltage
according to the software and the gas load condition of
the pump.
Moreover, it manages signals from sensors,
input/output connection information to be displayed on
the hand-held terminal, and gives outputs for a fully
automatic operation.
A dedicated non-volatile RAM is used to store pump
operating parameters and the input/output programmed
information upon failure for a period of 10 years
accumulated off time.
The controller can be operated by remote signals via
the left panel connector and may be
monitore/reprogrammed using the optional hand-held
terminal via the right panel connector.
Turbo-V 70 Controller