Vari VARIMATIC 300, Инструкция по эксплуатации

Страница: 12 / 35

12
Loosen the locking handles (7) in the
anticlockwise
direction. Install the
support legs (8) to U-clamps (9). Fasten
the locking handles in the clockwise
direction. Lower the machine on the
ground and release the ropes. Loosen
the locking handles in the anti-clockwise
direction to adjust the support legs on
the same level of the transport wheels
until processor is level. Fasten the
locking
handles in the clockwise
direction.
The support legs can be
lowered to stand on the
ground during the work
and lifted to the air during
the transportation.
Fasten the connecting piece (10) to the
front stand with M10x60 bolts (11), M10
lock nuts and washers (12).
Install the nose wheel (13) to U-clamp
(14) and adjust it on the same level of
the transport wheels and support legs.
Fasten the locking handle in the
clockwise direction.
The nose wheel can be
lowered to the ground for
minor moving of the
processor and should be
lifted to the air during the
work and transportation.