22 9 1972004A HINGE Z-1 1
103 22 9 1937 001 106 002 Hinge weldment 1
104 22 9 9316 038 106 003 Pin complete 1
105 106 544 Bolt M10x75
ČSN 021101.25
1
106 106 529
Nut M10 ČSN 021401.25
2
107 106 530
Washer 10 ČSN 021740.05
2
CASING T-20 1
109 22 9 1846 015 110 037 Left casing 1
110 22 9 1846 014 110 036 Right casing 1
113 110 539
Bolt M10x90 ČSN
021101.25 1
IX. WARRANTY TERMS.
1. Manufacturer answers for product’s design, function, quality and completeness of the machine and implements only on the
condition that the machine is handled according to the instructions presented in the manual which is an integral part of the
delivery of all machines and implements.
2. Warranty does not apply to safety devices against machine overloading, to defects from natural wear of the machine or
implement, improper storage or unskilled operation and/or to damages caused by the customer or by a third person.
3. Warranty extincts by a breakdown of the machine or working implement, which did not result from a defect incurred at the
manufacturer’s or from any intervention into construction of the machine or implement not agreed by the manufacturer.
4. Detailed description of warranty terms is to be found in the Letter of quarantee which is attached to the machine or
implement and which is given to the customer at purchase.
X. INSTRUCTIONS FOR ORDERING SPARE PARTS:
The following data are to be used for easier identification when ordering the spare parts:
- Machine type, engine type, machine serial number and year of manufacture;
- Ordering number given by manufacturer and its name in the component list;
- Number of ordered pieces separately for each item;
- Precise address, telephone number, fax number or e-mail address;
- If you are not certain about the correct identification of the component, send the damaged component either to the nearest
service shop or to the manufacturer;
- All components should be ordered in the nearest service shop or at your dealer’s.