8
TECHNICAL DESCRIPTION :
Drive:
the drive is a supporting component of the whole machine. The drive body is a
grey cast iron casting with machined function surfaces. The case cover is fitted on the
body with four screws. The drive shaft is mounted on antifriction bearings in the drive
body. A bevel gear wheel is mounted on the front end. On the bottom end of the bevel
pinion which is mounted in the case cover on two ball bearings and one needle bearing
there is a rotating disk provided with three mowing blades which is carried along by
means of a feather. The bottom disk is pivoted on ball bearings.
The mowing blades are pivoted on the circumference of the rotating disk. The screws
of the rotating disks are made of high-quality high-strength steel .
Oil is filled through an oil filling hole fitted with a plug.
Cover:
the drive is fitted with a cover made of ABS plastic. The cover ensures the
discharge of mown vegetation out of the machine. Rubber aprons are screwed on to
the rear part of the cover, as well as a handrail for handling the machine and a rubber
apron preventing mown vegetation from flying off between the power assist wheels.
The side apron is fitted to a holder which is fitted in a rectangular tube located on the
rear part of the machine cover and it is secured by means of two screws.
A cast iron weight with a mass of 6 kg is screwed on the cover to ensure a better
balance which is necessary for a better copying terrain by the rotating disk of the
machine, particularly in cases of a markedly uneven terrain.