17
Working attack of the machine
:
After the above mentioned elemental operations have been carried out it is possible to
start the proper working with the machine.
Set up the engine maximum speed, put the rotation disk in the rotation with maximum
speed and then set the machine in motion against the vegetation you wish to mow.
The vegetation mown is thrown away by the rotating disk in the direction against the
apron by means of which it is put in a row. If the vegetation mown is very dense,
overgrown, bad, rotten from the bottom or flattened it is necessary proportionally to
this condition to decrease the width of the machine attack so as to avoid a marked
decrease of the engine speed and clutch slip ( slipping clutch is whistling or rattling).
If a congestion of the space between the rotating disk and the power assist unit occurs
stop the motion, stop the engine and clean this space.
Pay an increased attention and take increased care when cleaning the space below the
cover. The cutting edges of the working blades are sharp. When cleaning protect your
hands with protective gloves.
CONTROL TECHNIQUE OF THE SAFETY IGNITION
BREAKER
The safety ignition breaker BVA - 96 corresponds to the standard of commonly used
safety ignition breakers used by manufacturers of small agricultural mechanisation
abroad.