Vari Lucina Max BDR-620, Руководство пользователя, Страница: 25 / 60

Lucina MaX
Problem Cause Solution
Control levers do not come back tight cable wire; bended cable Lubricate or exchange cable
return spring is broken Exchange it with a new one
other defect Visit the service centre
Other defect Visit the service centre
Tab. 8: Problems and solutions
2.5.7 Storage
Before any longer storage (e.g. at the end of the season) clean any dirt or plant remains from the cutter. Prevent all unauthorised
persons from accessing the cutter. Protect the cutter from wind but do not use airtight protection, which can cause higher corrosion.

Check that the blades are intact and sharpen them (if damaged, exchange them).
We strongly recommend:
➢
Mothball the blades on the cutting disc.
➢
Remove all dirt and plant remains.
➢
Repair damaged places on colour parts.
➢
Empty petrol tank and carburettor (for further instructions see engine user manual).
➢
Carry out seasonal lubrication of the cutter according to Table 6 .
➢
Check tyre pressure and fill the tyres to MAX level.
2.5.7.1 Machine washing and cleaning

Follow local laws protecting water courses and other water resources from chemical contamination when
cleaning the cutter.

Never wash the engine with a stream of water! The electrical equipment of the engine might be damaged
on starting the engine.

Do not use pressure washers for cleaning the cutter.
2.5.8 Cover and machine disposal after its service life termination
You are required to carry out the package disposal after unwrapping the cutter, following national waste laws and regulations.
We recommend to follow these instructions when disposing of the machine after its service life termination:
➢
Dismount all machine parts that can still be used.
➢
Empty oil from gearbox and engine into an appropriate tank and hand it in at a collection point 61 .
➢
Dismount plastic and coloured metals.
➢
You are required to carry out the disposal of the dismantled machine remainder and dismounted parts, following national
waste laws and regulations.
2.5.9 Instructions for ordering spare parts
This user manual does not include a list of spare parts. The latest version of our catalogue can be downloaded from our web pages. If
you do not have Internet access, you can order the catalogue in printed form (against COD). In order to identify your machine properly you
need to know its
Type , Order Number (C№) and Identification Number (№) . These are given on the nameplate of your machine in
the box, or in the warranty certificate. It is only possible to find proper spare part designation with this information.
Field Description
Type
Machine type designation.
BDR-620
№
Unique manufacturer identification number.
1004400154.0314.00004 (product.month-and-
year.consecutive-number)
C№
Business (order) number.
4428
Tab. 9: Nameplate - example
61
Collection point information is given by responsible local office.
25
R
ev
iz
e
0
5
/2
0
1
4