KC-435
8
Protect the hearing with suitable protective aids according to EN 352-1 (shell hearing protectors) or EN
352-2 (plug hearing protectors). Ask your dealer for these aids.
Interrupt the work with the machine after no more than 20 minutes with breaks of at least 10 minutes.
The operator can’t be exposed to effects of any other sources of noise and/or vibrations during these
breaks.
1.2.3
Safety pictographs
!
The user is obliged to keep the pictographs on the machine legible and arrange their replacement if
they get damaged.
1 –
Warning!!!
Read the instructions for use
carefully
before
using
the
brush
cutter/trimmer.
2 – Always use sturdy shoes and appropriate
working clothing (long trousers) when cutting.
Never operate the brush cutter/trimmer
barefoot or wearing sandals! Use protective
aids for sight and hearing and work in
protective gloves.
3 –
Warning!!!
Danger of catapulted objects.
No other persons may occur in the working
space of the brush cutter/trimmer and in its
dangerous vicinity of 15 m.
4 – The brush cutter/trimmer is designed for
using only grass blades and nylon head.
!
The brush cutter/trimmer is not
adapted for using saw blades.
5 – Max. allowed revolutions of the cutting
tool.
Table 3: Safety pictographs
1.3
Basic information
1.3.1
Machine use
The brush cutter/trimmer is intended to cut grass using the nylon string or grass blade as finishing work. The nylon
string is intended to cut in hardly accessible areas or places around various obstacles where you can get with a lawn mower.
The three-tooth grass blade is intended to cut grass in hardly accessible places, high and overgrown vegetation and even
wooden sprouts with a diameter of up to 2 cm.
!
It is forbidden to remove any protective devices and covers from the machines.
!
The brush cutter/trimmer can’t be used to cut shrubbery, trees, prune trees, etc.
1.3.1.1
Technical data
KC-435 brush cutter/trimmer
Unit
Value
Dimensions (L x W x H)
mm
1890 x 700 x 500
Weight (without fuel, cutting accessories and safety cover)
kg
9
Turning direction (from the operator’s view)
to the left
Max. revolutions of the spindle
7
min
-1
7730
3-teeth blade (blade Ø x thickness / attachment hole Ø)
mm
255 x 1,4 / 25,4
Length of the nylon cutting string Ø 2,4 mm
m
6
Area capacity of the machine
8
m
2
.h
-1
100-300
7
Real revolutions without load.
