background image

 

 

KC-435 

 

12 

 

Place the brush cutter/trimmer in a working position to make the work easier. 

 

Make  sure  that  the  brush  cutter/trimmer  is  in  a  stable  position,  so  that  the  fuel  can’t  be  spilled 
unintentionally. 

See detailed information in the instructions for use of the engine

10

1.4.2.3

 

Adding the motor oil 

 

If  the  engine  operates  with  insufficient  quantity  of  oil,  it  can  be  seriously  damaged  and  the  warranty 
claim can’t be made. 

 

Check the oil level before each starting; carry it out on a flat surface and with the engine being switched 
off. 

 

The  operator  is  obliged  to  check  the  oil  level  before  each  engine  starting  according  to  the  table  of 
required maintenance

 11

See detailed information in the instructions for use of the engine

 12.

 

1.4.2.4

 

Before starting 

 

 

Put on the prescribed clothing and safety aids, make sure that 
the  brush  cutter/trimmer  is  equipped  with  all  the  prescribed 
safety covers and that the cutting tool is properly tightened. 

 

Make sure that the control handle is properly tightened. 

 

Place  the  brush  cutter/trimmer  on  a  solid,  free  surface  and 
make  sure  that  the  operator  is  standing  on  a  solid  and  flat 
surface as well. 

 

Check whether the spark plug is tightened. 

 

 

1.4.3

 

Starting and stopping the engine 

1.4.3.1

 

Cold start 

The  engine  start  is  considered  to  be  cold  start  if  the  engine  hasn’t  been  running  for  more  than  5  minutes  longer 

than 10 minutes ago. 

If the air temperature is very high (summer day), it is possible that it won’t be necessary to use the choke. 

                                                                        

10

 

The original instructions for use and its translation are a part of the machine.

 

11

 

See the instructions for use of the engine.

 

12

 

The original instructions for use and its translation are a part of the machine.

 

Содержание KC-435























Отзывы: