Vari Hurricane MaX F-580BiS, Руководство пользователя, Страница: 37 / 64

Hurricane MaX
2.7 A
TTACHED ILLUSTRATIONS
The attached illustrations are common for all language versions. They can be found at the end of this manual in Chapter 4 , page 56 .
Fig. 1: Machine Unpacking
Fig. 2: Main Machine Components
Fig. 3: Machine Assembly
Fig. 4: Starter panel
Switch:
STOP - Running engine stop. (Ignition coil shorting.)
1 - Starting circuit wiring.
Button:
START - Engine starting only with its switch in position 1 .

Do not start the engine with its switch in its STOP position.
1
STOP
:
The engine is not running.

It is used to turn off a running
engine.

Engine shutdown.

Refuelling.

Machine transport.
See the figure in chapter 4 .
Fig. 5: Accelerator lever position
3
MAX
:
The engine runs at its maximum speed.
(Hare sign)

Working position
2
MIN
:
The engine runs at its idle speed. (Turtle
sign)

Short work break.
4
CHOKE
:
The engine choke is engaged.

Cold engine start.
It is not used in automatic choke engines.
Fig. 6: Gears 2 nd gear
RABBIT
1 st gear
TURTLE
Fig. 7: Blade spinning Fig. 8: Lever lock Fig. 9: Working position
Step
Legend to Fig. 10
Fig. 10: Chassis preparation – accessories replacement
See the figure in chapter 4 . Fig. 12: Rear covers
Fig. 11: Machine Working Width Fig. 14: Working tool mount Fig. 13: Stubble field height
Fig. 15: Drive clutch and brake Fig. 16: Bowdens I adjustment Fig. 17: Travel clutch
Fig. 18: Bowdens II adjustment Fig. 19: Gearbox belt
Fig. 20: Belt paths Fig. 21: Sticker - Forbidden space
Fig. 22: Combined sticker
Fig. 23: Sticker Fig. 24: Sticker
Fig. 25: Sticker - direction of rotation
37
Re
vi
ze
1
0/
20
19