Vari Hurricane F-600, Инструкция по эксплуатации, Страница: 6 / 41

F-600
6

When the machine is in operation, all other persons (children in particular) and animals
have to be outside the machine’s working space. The machine operator can continue
working only after they have been shown out to a
safe
distance (see Pictograph 6).
NOTE : The outer safety zone A around the inner working zone B is specified in standards EN 12733
and CSN EN 12733. Entry into the working zone is to be prevented by using appropriate prohibitory
signs. Distance between the individual sides of zones A and B must not be less than 50m. Should the
dangerous zone of machine operation be entered by a person or animal, the machine operator must
release the cutting implement drive lever without any delay and wait with the further work until the
zone is clear again.

Removal of any protective equipment and casings from the machine is forbidden.

The
safe
slope accessibility of the machine is 10°. Maximum inclination of the engine at
work is 20° for a long-time operation and 30° for a shorter time (up to 1 minute).
NOTE : The machine should be preferably not used on wet grass. The terrain you are moving on must
be always safe. Do the work while walking not running. Be particularly careful when changing
direction on the slope. Cutting on steeply inclined slopes should be prevented. If you fall, do not hold
the machine but release your grip on it.

All kinds of the machine repair, adjustment, lubrication and cleaning are to be made with
the machine switched off and spark plug cable disconnected.
3.2 Declared noise and vibration values
Hurricane F-600 A B C
HONDA GCV 190
L
pAd
=
84+1 dB
L
WA
= 98 dB
a
hvd
= 7.3+2.92 m.s
-2
Explanatory notes:
A = declared emission level of acoustic pressure A at operator’s site L
pAeq,T
(according to ČSN EN 12733,
Attachment B and ČSN EN ISO 11 201)
B = guaranteed level of acoustic performance of the machine L
WA
(according to Government Regulation no.
9/2002 Gaz.)
C = declared sum of accelerated vibrations transmitted onto operator’s hands/arms (according to ČSN EN 12733,
Attachment 6, Point C.4.1.1.1 and ČSN EN ISO 20643).
3.3 Safety pictographs.
The user is obliged to maintain the pictographs on the machine legible and to provide
for their replacement in the case of damage.
No. Location Description of the safety information
1
Left side of chassis Manufacturing label with machine information and CE sign
2
Guaranteed level of machine’s acoustic performance
3
Upper cover of gearbox
Instructions for use to be studied prior to machine operation and maintenance
During the machine maintenance the conductor is to be disconnected from the spark plug
Entry of exposed and other persons into the machine’s working space is prohibited
Safe slope accessibility
4
Front lifting cover Arrow for the direction of tool rotation – to the right
5
Left rear side of blade
cover upper surface
Instructions for use to be studied prior to machine operation and maintenance
During the machine maintenance the conductor is to be disconnected from the spark plug
Putting one’s hands or feet into the cutting blade working space is prohibited – Danger of
limb cut (off)
6
Right rear side of blade
cover upper surface
Entry forbidden for other persons and animals. Minimum safe distance from the machine.
Danger of injury by flying-off material fragments and flung objects. Other persons and
animals to be kept at a safe distance from the machine.
7
Right control lever Cutting blade drive switch. “0” = blade does not turn, “1” = blade in rotation
8 Next to accelerator lever Lever positions for adjustment of engine rotations
9 Left control lever Machine travel switch. “0” = machine stands still, “1” = machine travels
10
Swivel handlebars holder Danger of fire when refuelling
11
In front of right rubber
handle Adjustment of minimum and maximum cutting height