Vari Hurricane F-600, Инструкция по эксплуатации, Страница: 10 / 41

F-600
10
Figure 2: Machine assembly
Unscrew the front
cover from the
machine chassis (on
both sides) Run the front cover
through the cutouts in
the chassis deflector
(the front cover must
crane at the deflector
when lifting) and
screw it back to the
machine chassis.
Tighten the nuts so
that the cover can be
freely lifted.
Mount on the springs.
5.2 Adjustment of handlebars.
Handlebars can be adjusted in two planes:
•
Height: Loosen tightening nut M10 (position (1) in Fig. 3) and do the adjustment of handlebar
grips at height comfortable for the operator.
•
To sides: Press down the lever (position (2) in Fig. 3) and turn the handlebars by one position
to the left or to the right.
In order to lessen the machine size e.g. for transport in a car, the handlebars should be either tilted
forward over the engine or lowered into horizontal position and then turned clockwise by 180°.
Bowden cables must be watched not to get tensioned somewhere on the machine construction.
Figure 3: Adjustment of handlebars
1
Tightening nut
for height
adjustment of
handlebars
Lubrication point
2
Side
arrestment
lever
3
Washer 10.5
4
Self-locking nut M10
2
Bolt
1
Spring (2 pcs)
Side adjustment
Height adjustment