Vari BDR-595 E EuroAdela, Инструкция по эксплуатации, Страница: 6 / 39

BDR-595 E EuroAdela
6
4 Operation safety
4.1 Safety regulations
,
This international symbol indicates important messages concerning safety. When you see
the symbol, be aware of a possible injury to yourself or to other persons and read attached
instructions carefully.
,
The machine operator must be over 18 years of age. He (she) is obliged to get familiar
with the instructions for use of the machine and is supposed to be informed of the general
principles of work safety.
,
Prior to carrying out any activities in the near vicinity of the machine, switch the engine
off and wait until the mowing disk stops moving! Before leaving the machine alone,
switch off the engine!
,
Never let the engine running at maximum speed or idling for a long time with the
mowing disk drive clutch and travel wheels drive clutch being switched off! Components
of the machine drive (V-belt, belt pulley, clutch pulley, etc.) might get damaged!
,
Prior to each employment of the machine, check its parts (working mechanism or its
casing in particular) for possible damage or loosening. Possible defects must be rectified
without any delay. Repairs are to be made only with original spare parts.
,
Before using the machine, the stand must be cleared of solid bodies such as stones, wires,
loose construction debris, etc., which could be flinging up or which might damage the
machine. If these cannot be removed, don’t work the places.
,
The machine is equipped with the rotating working tool. Maximum circumferential speed
is 60.3 m.sec
-1
. Therefore, see to it that other persons move at a safe distance from the
machine when it is in operation with regard to a possibility of mown stand or solid
objects flying away
,
With respect to exceeded recommended values of noise and vibrations, you are warned to
observe the following instructions when working with the machine:
a) Protect your hearing by using suitable protective aids specified in CSN EN 352-1
(shell ear protectors) or CSN EN 352-2 (plug ear protectors). Require the aids from
your dealer.
b) Work with the machine should be interrupted after max. 20 minutes for min.10
minutes. During these breaks, the machine operator must not be exposed to the effect
of another source of noise or vibrations.
,
Machine operators should use working aids authorized to CSN EN 166 or CSN EN 1731
(tight-fitting garments, sturdy shoes, working gloves and protection glasses). Keep a safe
distance given by the handle.