Vari Lite VL3500 Spot Luminaire, Руководство пользователя

Страница: 66 / 88

VARI
❋
LITE
®
- VL3500™ W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
4 8 21 - De cem be r- 20 07 0 2 . 9 6 8 6 . 0 0 0 1 A
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Table 4-2: Menu Function Definitions
Display Definition Purpose
10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Address Accesses option for setting luminaire DMX starting address.
All SEQ All Sequence Tests all internal mechanisms in sequence for X steps.
Aperture Aperture Sets aperture opening positions and test aperture function.
Cal ON Calibration On Configures arc luminaire so that lamp will strike after calibration.
Channel
XXX
DMX Channel Specifies DMX channel for display of current data value.
Chg Lum
ID
Change
Luminaire ID
Normally set to luminaires serial number.
Cmd Lock Remote
Lamp-Level
Command
Lock
Denies (lock On ) or allows (lock Off ) remote lamp power-level changes from
the console. When Lamp Level is set to 1500W , 1200W , or 900W , Cmd Lock
On locks that power-level setting at the luminaire and any attempt to change
the power-level setting from the console is ignored.
Col Wheel Color Wheel 1 Specifies color wheel for manual control ( Manual ) or testing ( Test ).
Col Wheel2 Color Wheel 2 Specifies color wheel for manual control ( Manual ) or testing ( Test ).
Config System
Configuration
Accesses options for setting lamp, pan/tilt, and Menu Display defaults. Also
accesses lamp information such as number of hours used, along with its
respective reset function.
CTO CTO Function Specifies CTO (color temperature orange) parameter for manual control ( Man-
ual ) or testing ( Test ).
Cyan Cyan Specifies cyan color parameter for manual control ( Manual ) or testing ( Test ).
Data DMX Data Accesses option for setting DMX address channel.
Dimmer Dimmer Specifies dimmer mechanism for manual control ( Manual ) or testing ( Test ).
Disable Disable Disables a function.
Display Display Accesses options for Menu Display illumination time and orientation.
Disp Tilt Menu orienta-
tion control
Sets the orientation of the menu display to match the luminaire orientation,
either standing (
Up ) or hanging ( Down ). The Auto setting is functional only for
display boards manufactured prior to 01 July 2006.
DMX DMX Accesses options for DMX system settings.
Download Download Initiates download of luminaire software.
Enable Enable Enables a function.
Encoder Encoder Accesses pan/tilt encoders for diagnostic testing.
FAIL Test Fail Indicates that a test has failed.
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Fixture Accesses luminaire information such as serial number, software version, and
total operation hours. Also accesses recalibration and download options.