Vari Lite VL3500 Spot Luminaire, Руководство пользователя

Страница: 33 / 88

I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
0 2 . 9 6 8 6 . 0 0 0 1 A 21 - De cem be r- 20 07 15
Floor Mounting the Luminaire
The luminaire enclosure is sufficient to stabilize the luminaire in a floor
installation, provided that the mounting surface is flat and sturdy.
Connecting Data and Power
A maximum of 32 luminaires may be connected in any one DMX data link.
Note: This maximum limit applies to the luminaire "daisy chain" only. Your system or console may
require fewer luminaires on a single data link path. Consult your console documentation for more
information.
To connect power and data:
Step 1. Connect data cable from console to first luminaire in chain at DATA IN connector.
Step 2. If required, connect additional data cables from DATA THRU connectors to DATA IN
connectors of remaining luminaires in link.
Step 3. At last luminaire in link, install male termination connector at DATA THRU connector.
(Luminaires and other devices on the same DMX chain may not function properly without
termination.)
Step 4. Connect AC input cable connector to power input source.
Step 5. Dress AC input and data cables and secure them so they do not interfere with luminaire head
and yoke movement.
Figure 2-5: Connecting Power and Data
Light Beam Projects Intense Heat:
Do not illuminate objects within 3.5 m (11.5 feet).
See
Warnings and Cautions in this chapter.
DATA THRU
ENTER MENU
AC PWR
DATA IN
~
AC IN
DATA THRU
ENTER MENU
AC PWR
DATA IN
~
AC IN
DATA THRU
ENTER MENU
AC PWR
DATA IN
~
AC IN
Termination Connector
Data Thru Data Thru
Data In
(from console)
(at last luminaire)