![background image](http://html2.mh-extra.com/html/vari-lite/vl3500-spot-luminaire/vl3500-spot-luminaire_user-manual_3530383035.webp)
I
NSTALLATION
: A
DDRESSING
2
0 2 . 9 6 8 6 . 0 0 0 1 A
21 - De cem be r- 20 07
17
Addressing
Program Starting Address
The address setting for DMX console controlled systems is entered using the Menu Display (refer to
“Menu Operation” on page 42
). The luminaire retains the DMX address even when power is removed.
Note:
Refer to your console operating instructions for specific information regarding its addressing
requirements.
Program a DMX starting address:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until
Address
appears. Press [Enter].
Step
3. Press [Up] / [Down] arrows to enter starting address.
Step
4. Press [Enter] to set.
Program Starting Address Without Calibrating
Luminaire
It is possible to bypass the calibration sequence and go directly to the Menu Display programming in
order to pre-program an address setting.
Program starting address without calibrating luminaire:
•
While powering up luminaire, press and hold [Menu]. Program address as in
Program Starting
Address
above.
Note:
The luminaire will require a reset to restore control.
Содержание VL3500 Spot Luminaire
