manualshive.com logo in svg

Vari Lite 20.5002.0004, Руководство по обслуживанию, Страница: 149 / 310

Поделиться
Скачать
Vari Lite 20.5002.0004 Скачать руководство пользователя страница 149

C

HAPTER 

3.  M

AINTENANCE 

P

ROCEDURES

3-103

02.9631.0010

CONFIDENTIAL

15 Jan 98

3.3.17  Arc Power Supply Maintenance

3.3.17.1  Arc Power Supply Removal and Replacement

Parts:

1 EA

ASSY, ARC POWER SUPPLY 400W (400 watt) (VL2B)

(22.1006.0002)

1 EA

ASSY, ARC POWER SUPPLY 400X (400 watts) (VL2B)

(22.1006.1002)

1 EA

ASSY, VL2C APS 600W (23.9637.0008)

Tools:

Screwdriver, Phillips #2

Notes:

• 

APS units 400X and 400W are interchangeable, but their parts are not.
Do not try to exchange control or switch boards between 400X and
400W APS units.

• 

APS 400W units are to be retrofitted into APS 400X units.  As 400W
units fail, they should be returned for shop retrofit.

To remove and replace arc power supply (Figure 3-34):

Step 1.

Remove power to luminaire.

Step 2.

Open chassis lid.

a. At electronics chassis, remove six 10-32x3/8"PPB screws

that secure chassis lid to chassis and open chassis lid.

Step 3.

Remove APS power supply.

a. At APS power supply, disconnect all connectors.

6-32X3/8"PPB SCREW

APS ASSEMBLY

ELECTRONICS
CHASSIS 

APS2C

Figure 3-34.  Arc Power Supply Removal and Replacement

Содержание 20.5002.0004























































































































































































































































































































Отзывы:

Нет отзывов