User Manual: UM50566-EN
Optica 30/40/50 series
Revision: 3.0
Date of release: 2019-01-09
4/36
www.vareximaging.com
1.
Introduction
1.1.
Contact information
Dear Customer, thank you for choosing a Collimator that is designed, manufactured and marketed by:
Varex Imaging Nederland B.V.
If you need additional information, need support or want to report a problem with the Collimator,
please contact your distributor or Varex Imaging Nederland B.V..
Manufacturer
Distributor
Name
Varex Imaging Nederland B.V.
Address
Anholtseweg 44,
7091 HB Dinxperlo
The Netherlands
Telephone
+31 (0)315 659 150
Fax
+31 (0)315 659 140
Website
This user manual is applicable for the Optica 30/40/50 Series,
Series
Touchscreen
Control knobs
Status LED
Light button
30
-
x
x
x
40
x
x
x
x
50*
-
-
-
-
x
means that this feature is present, - means that this feature is absent
*The Optica 50 series is meant for remote control only.
1.2.
Symbols used in this document
To ensure adequate and clear understanding of the information provided in this manual, the symbols
listed below are used to indicate warnings, cautions, actions and notes that are important for correct
and safe use of the Collimator.
WARNING:
Warnings are directions which, if they are not followed, can cause fatal or serious injuries
to a user, engineer, patient or any other person or can lead to a mistreatment.
CAUTION:
Cautions are directions which, if they are not followed, can cause damage to the device
described in this manual or any other equipment or goods and can cause environmental
pollution.
NOTE:
Notes provide advice and highlight unusual points. A note is not intended as an
instruction.