VARDE OVNE Samso, Инструкция по установке и эксплуатации

Страница: 4 / 19

4
Important!
Before
lighting up your Varde Stove for the
first time, we recommend that you read these
instructions carefully and contact your local stove
vendor or building authoorities to inquire about
existing regulations regarding the intallation of
stoves. Please follow these regulations closely.
Inspection of installation
It is very important that the installation is in-
spected by a qualified chimney sweeper before
the stove is used the first time.
Regulations
All local regulations as well as National and
European, should be adhered to when instal-
ling your stove.
All Varde Ovne stoves are closed fireplaces.
The stove is designed for intermittent com-
bustion and can be connected to a chimney
used by other fireplaces, as long as the app-
ropriate rules and regulations are adhered to.
This
Varde Stove
Has passed the
Danish /European Standard DS/EN 13240
Norwegian (NS) and the
German (Stufe 2) test , and have thereby proved
to be a environmentally friendly product.
Proffesional installation
We recommend that you consult with the
dealer where you purchased the stove or an
other competent installer, as there may be
specific things to consider during the installa-
tion. You should also reseive the applicable
rules for installing the stove and follow them.
Please Note!
You are by law required to register your stove at the local chimney-sweeper .
Until installation keep the stove dry and not to cold. The stove cannot stand moisture.That an
existing chimney, not necessarily is effective enough for a new modern stove.Vermiculite is a
very porous material, therefore handle with care. When refilling the stove, put the wood careful-
ly, use the glove.
EC declaration of confirmaty.
MANUFACTURER
Name:
Varde Ovne A/S
Adress Kongevej 246, DK-6510 Gram, Danmark
Stove Inspection
Name: RWE Power AG
Adress Durner strasse 92, 50226 Frechen, Germany
Notified body number xxxx
Product Varde Samsø
Product type Samsø
Type code Heating stove, suitable for intermittent combustion
Standard Costruction products (89/106/EC/) standard used
EN 13240
Application Residential Heating
Fuel Wood
Special conditions Non
CE-Markning
Issued 2012
Nominal Output 5 kW
Fuel type Wood
Fluegas temperature 340
°
C
Efficiency 75 %
Co-release 0,10 %