Cap Lock
Mouthpiece
Cooling Unit Cap
Base Seal Ring
(small)
Base Seal Ring
(large)
Screen
(coarse mesh width)
Cooling Unit Base
Mouthpiece Seal Ring
31
30
8. HYGIENE
The Lip Piece is put on the folded out
Mouthpiece, slid until stop and is then
ready for operation.
The Cooling Unit with Mouthpiece and
the Lip Piece may be used by only one
person.
A Lip Piece may be used for max. 4
hours after initial operation if it is un-
damaged and clean. Afterwards, it
must be disposed of in the household
waste and a new Lip Piece must be
used due to hygienic reasons.
Every further use beyond this or the
use of damaged and/or contaminated
products respectively is the user’s re-
sponsibility.
We assume no liability if this recom-
mendation is ignored.
Please note that damaged or
brittle Lip Pieces are not to be
used.
8.2. Cooling Unit with Mouthpiece
When the vapors are cooled, it is in-
evitable that a fraction is condensed
on the internal surfaces of the Cool-
ing Unit.
The component parts of the Cooling
Unit, including the Mouthpiece must
be monitored daily and cleaned if nec-
essary (see Chapter 8.3. „Cleaning
of the Cooling Unit with Mouthpiece“,
page 32). For that, the Cooling Unit
must be disassembled (see Chapter
9. Disassembly and Assembly of the
MIGHTY MEDIC Cooling Unit, page
34).
Product Overview of the MIGHTY MEDIC Cooling Unit
The Cooling Unit consists of:
For optimal inhalation, please ensure
the Cooling Unit and Mouthpiece are
clean and free from debris blockage.
The condensate can be sticky.
The Cooling Unit can be dis-
mantled more easily when it
first warmed up.
Caution! Hot surface!
After using the
MIGHTY MEDIC Va-
porizer, do not touch the Filling Cham-
ber or the Dosing Capsule until they
have cooled down again.
8. HYGIENE
