Vanward GD4819S, Руководство по сборке, использованию и уходу

Страница: 21 / 28

21
„
TO LIGHT MAIN AND SIDE BURNERS OF THE GRILL:
1. Read instructions before lighting.
2. Turn all knobs to “O” then open the tank valve. Always keep your face and body as far
from the grill as possible when lighting.
3. Open lid during lighting.
4. Push and hold the ignitor button, at the same time push and turn any control knob slowly
to “MAX” position. The electrode will spark simultaneously to light the burner in sequence.
Repeat the same operation when lighting each burner. Turn the control knob to “O”
position IMMEDIATELY if the burner does not light within 5 seconds, wait 5 minutes for
gas to dispel, then repeat the lighting procedure.
5. Follow match lighting instructions if burner can’t be lit after repeated 3-4 times.
„
TO LIGHT THE MAIN AND SIDE BURNERS BY MATCH (AS THE BELOW FIGURE
SHOWN):
If the burner will not light after several attempts then the burner can be match lit.
Tools:
Lighting rod (hanging behind the right side shelf)
Usage:
1. Read instructions before lighting.
2. Open the lid during lighting.
3. Simply
place a match between the coils on the end of the lighting rod, light the match and
insert it into the hole of firebox to ignite.
4. Push and turn the knob to “MAX” position, and make sure the burner lights and stays
lighted.
5. Repeat 3~4 to light other burners.