Vanward GD4819S, Руководство по сборке, использованию и уходу

Страница: 19 / 28

19
4. Install the protective cap back gas tank valve.
LEAK TESTING
Although all gas connections on the grill are leak tested at the factory prior to
shipment, a complete gas tightness check must be performed at the installation site
due to possible mishandling in shipment, or excessive pressure unknowingly being
applied to the unit. Periodically check the whole system for leaks, or immediately
check if the smell of gas is detected.
„
BEFORE TEST
1. Make sure that all packing material is removed from the grill including the burner tie-down
straps.
2. Do not smoke while leak testing.
3. ALWAYS TURN OFF GAS SUPPLY IF LEAKAGE IS DETECTED
4. Never leak test with an open flame.
5. Make a soap solution with one part liquid detergent and one part water. Prepare a spray
bottle, brush, or rag to apply the solution to the connections. For the initial leak test, make
sure the cylinder is full.
5. Grill must be leak tested outdoors in well-ventilated area, away from ignition sources
such as gas fired or electrical appliances, and flammable materials.
6. Keep grill away from open flames and/or sparks while testing.
„
TO TEST
1. Make sure all control knobs are in the “O” position.
2. Make sure the regulator is connected to the gas tank tightly.
3. Completely open the tank valve by turning counter clockwise. If you hear a “POP” sound,
turn gas off IMMEDIATELY, it indicates a heavy leak at the connection. Call your gas
dealer or fire department.
4. Check every connection from the gas tank up to and including the connection to the
manifold pipe assembly (the pipe that goes to the burner) by brushing or spraying the
soapy solution on the connections.
5. If soap bubbles appear, there is a leak. Turn off the tank valve IMMEDIATELY and
retighten connections, Open the tank valve again, and recheck.
6. If leaks cannot be stopped, DO NOT ATTEMPT TO REPAIR. Call our service center for
help.
7. Always close the tank valve after leak test by turning clockwise.
Only those parts recommended by the manufacturer should be used on the grill. Substitution
can void the warranty. Do not use the grill until all connections have been checked and do
not leak.
„
SAFETY TIPS
1. ALWAYS CHECK FOR LEAKS AFTER EVERY GAS TANK CHANGE.
2. ALWAYS CHECK FOR LEAKS OF EVERY CONNECTION BEFORE EACH USE.
3. USE LONG BBQ TOOL TO AVOID BURNS.
4. IF ANY GREASE OR HOT ITEMS FALLING FROM THE GRILL ONTO THE VALVE,
REGULATOR, HOSE, ANYTHING CONVEYING THE GAS, CLOSE THE GAS
IMMEDIATELY. CHECK THE CAUSE, AND REMOVE THE CAUSE. REPERFORM THE