After installing the memory card, by default, the camera immediately
starts loop recording video when it connects to a power source
and turn on. If it doesn’t connect to a power source, when you
press the power key to turn it on, it will not auto start recording,
you should press the REC button to start recording.
By default, the loop recording time is 3 mins. Please go to
“Record Setup” > “Loop Recording” to change to 1 min, 3 mins,
or 5mins for your need. When it turns off, the camera will record
video in 30 mins per clip, but would not over write the old videos
when the card is full.
The loop recording video is named by “Year Date Time--Serial”
(for example, “20170509-164638 MP4”) format and stored in
“Video” > “Normal” folder. When the microSD card is full, the
camera will write over the old files with new recording.
While recording, the LED indicator is blinking blue, and a red dot
will flash on the top of the screen. You can stop/start the recording
by pressing the REC button.
4.4 Loop recording
The event detection is triggered by G-Sensor (Gravity Sensor), it
auto detects possible accident collisions, locks up the current loop
recording video clip and saves the footage in the Event folder so
it would not be over-written when the card is full.
4.5 Event Recording
- 11 -
2560X1440P30
000:00:40
CarDV-F09C
16:47:50
0.0 ev
08/05/2017
C
3 min.
Содержание OnDash X3
Страница 1: ...User Manual OnDash X3 Dash Cam ...