Vantrue OnDash X1 PRO, Руководство пользователя

Страница: 12 / 40

-
GPS Setup: Default setting is On. Press Confirm to turn OFF/ON.
-
Speed Unit: Default setting is MPH. Press Confirm to select KMH
or MPH.
When the setup finished, press MENU button to exit.
Check and delete videos/images in the Normal/Event folder.
-
Event: Event videos (detected by G-Sensor and manually
locked) stored.
-
Normal: Normal recording videos stored.
-
Photo: Images stored.
-
All: Event videos, Normal recording videos and images stored.
D. Files
Go to the MENU interface, and “System Setup”>“Time & Date”,
press Confirm button to set. In the time setup interface, press UP
or DOWN button to select date and time value, press Confirm
to confirm and go to next. When the setup is finished, press
MENU button to exit.
4.3 Date/Time setting
After installing the memory card, by default, the camera imme
diately starts loop recording video when it connects to a power
source and turn on. If it doesn’t connect to a power source, when
you press the power key to turn it on, it will not auto start recording,
you should press the Confirm button to start recording.
4.4 Loop recording
- 10 -
Time&Date
02 06
13 : 25 : 09
DD / MM / YY
BACK ENTER
2017 / /