Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | G202 User Manual
34
Advanced DHCP protocol settings for WAN interface are shown below.
Description of the numbered areas
1.
Enable
Use default gateway
2.
Enable
Use
DNS server advertised by peer
3.
Gateway metric
4.
MAC address cloning
5.
Network MTU
Be sure to save the settings before you exit the page.
WAN – Static Address
To activate static address protocol, select
Static address
in the drop-down list as the
protocol and click
Switch protocol
.
Upon click of
Switch protocol
, you’ll need to input the IPv4 address, subnet mask, IPv4
gateway, and the IPv4 broadcast. Custom DNS server could also be added.
Leave the field as is if not available.
When static address protocol is selected, DHCP server will be automatically disabled.
The advanced settings are basically same as those for DHCP protocol.
