Vantec NexStar-3 MX, Руководство пользователя

Страница: 13 / 40

11
Installation
Adjust the switches as shown in Figure E.
Turn on the power and press the "adjusting key"
button. When the "Raid 0" on the front panel
is lit, Raid 0 Mode is active and complete.
Raid 0 Mode:
It’s a combination of two physical partitions,
where the data is striped between hard drives.
It provides the best data speed though it
does not have any data redundancy.
Two equal hard drives
：
The capacity is equal to the sum of both hard
drives.
Two unequal hard drives
：
The capacity is double of the smaller hard
drives.
Setting RAID 0 Mode：
Raid 0
500GB
Raid 0
500GB
250GB
NST-360MX
Port 0
Drive A
250GB
Drive B
Port 1
250GB
Drive A
750GB
Drive B
NST-360MX
Port 0 Port 1
Equal hard drives Unequal hard drives
Striping across Striping across
( Figure E )
( Figure E )
( Figure F )
( Figure F )
Adjusting key