background image

 

3.0

 

Battery Charging 

 

CAUTION: 

The  battery  charger  should 

never

  be  used  as  an  AC  adapter  by  plugging  the  RF 

power  source  connector  into  the  battery  charger  connector.  The  Sealer  will  not 
function properly and the charger may be damaged. 

3.1 

Plug  the  battery  charger  into  an  AC  power  source  (wall  outlet)  and  verify  that  the  green 
power “ON” indicator light is illuminated. 

Power status is represented by the green power status indicator light as follows: 

Power Indicator Light Activity 

Description 

Green light not illuminated 

Charger not plugged into AC 
power source (wall outlet). 

Green light flashing 

Battery Pack deeply discharged.  
See Note in Section 3.2 for how 
to proceed. 

Green light continuously 
illuminated 

Charger ready for charging.  
Plug in battery pack 

 

NOTE:

 

Check to see that the power cord plug matches the power receptacle for the country in 
which  the  battery  charger  is  being  used.    If  it  does  not,  or  if  the  green  power  “ON” 
indicator  light  does  not  illuminate,  contact  an  authorized  Vante®  SEBRA  service 
center. 

3.2 

Once the battery pack is removed from the RF power source (Section 2.0), plug the battery 
pack’s red and black connector into the matching connector on the battery charger. 

CAUTION: 

The battery pack and charger connectors are keyed to properly engage. Be sure that 
the RED battery pack connector is engaged into the RED battery charger connector, 
and the  BLACK into the BLACK.  If they do not easily engage, do not  attempt  to 
force the connectors together. Improper battery connection will result in damage to 
the battery pack and/or charger and will void the warranty. 

 

CAUTION: 

Charge the battery pack 

only 

with the Vante® SEBRA Model 2389 Rapid Charger 

to ensure safety and prevent battery damage. 

 
 

Содержание 23891000-01













Отзывы: