Vante 23891000-01, Инструкция по эксплуатации

Страница: 8 / 12

2
2.0 Battery Pack Removal from Power Source
2.1 The Model 2380 battery low condition is signaled when an audio alarm sounds and the
battery low indicator light is illuminated. When this occurs, replace the battery pack with a
freshly charged back-up battery pack.
NOTE: Arcing at the sealing head may cause a false battery low indication, even when the
battery is not low. In such a case, shut the power source off and be sure the sealing
head and/or tubing are dry and clean (to eliminate the possibility of further arcing).
Turn the power source on and continue sealing. If the battery low condition is
indicated again and arcing has not occurred, then it is time to charge the battery
pack.
2.2 Prior to battery pack removal, turn the power switch to the “  ” (off) position. Disconnect
the sealing head and RF power cable and remove the power source from the carrying pouch.
2.3 Open the battery compartment door by sliding the latch to the right. Disconnect the battery
connector from the power source connector and slide the battery pack out of the
compartment. See Figure 2.1.
Figure 2.1