background image

 

 

ii 

 

Preliminary Information 

 

Document Scope 

This manual is a guide for the operation and care of the Vante® SEBRA  Model 
2389  Rapid  Charger.  The  information  contained  herein  is  based  upon  technical 
data that have been validated by Vante® SEBRA and is believed to be appropriate 
for the intended use of the product. 

Intended Audience 

This  manual  is  for use by  personnel  having  technical  skills  and familiarity with 
the Model 2380 Mini

 Hand Held Tube Sealer. 

Application 

The Model 2389 Rapid Charger is for charging of battery packs for and used with 
the Model 2380 sealer. 

Exclusions and Limits of Liability 

Vante®  SEBRA  makes  no  warranties,  expressed  or  implied,  and  assumes  no 
liability  in  connection  with  any  use  of  this  information.  If  the  product  or  its 
related  procedures  are  used  for  purposes  other  than  those  stipulated  herein, 
validation  of  the  specific  application  should  be  obtained,  otherwise  Vante® 
SEBRA  assumes  no  liability  or  obligation  nor  guarantees  product  performance. 
The contents of this manual are not to be construed as license to operate under, 
nor a recommendation to infringe upon, any patents. Personnel using the product 
do so at their own discretion and risk. 

Proprietary Information 

All  rights  are  reserved.  Copying  of  the  protected  designs  associated  with  the 
Vante® Sebra Model 2389 Rapid Charger is strictly prohibited without the prior 
written consent of Vante. 

User Alerts 

Throughout  this  document  CAUTIONS  and  NOTES  are  employed  to  notify  the 
user of important and/or critical information. 

CAUTION:

  A  Caution  indicates  a  condition  or  procedure  that  could  result  in 

damage to the unit. A Caution is enclosed with a single-line box. 

NOTE:

 

A Note indicates important and/or useful information. 

 

Содержание 23891000-01













Отзывы: