Vansco VMM3120, Руководство пользователя

Страница: 62 / 92

52 VMM3120
Installation
8.3.1. Dimensions
The following diagram shows the dimensions of the VMM3120:
Figure 22: Dimensions
8.3.2. Selecting a Mounting Location
The VMM3120 can be installed in the vehicle's cab or on the chassis. If used in a
marine application, ensure that it is protected from excessive salt spray.
Before mounting the VMM3120, review the following environmental and
mechanical requirements.
Note: Do not install the VMM3120 near any significant heat sources, such as
a turbo, exhaust manifold, etc. Avoid installing the VMM3120 near any drive-
train component, such as a transmission or engine block.
8.3.3. Mechanical Requirements
Review the following mechanical requirements before selecting a mounting
location for the VMM3120:

The VMM3120 should be mounted vertically so moisture will drain away
from it.

The wire harness should have drip loops incorporated into the design to divert
water away from the VMM3120.