Vansco VMM3120 Скачать руководство пользователя страница 16

Страница: 16 / 92

VMM3120

Quick Start



software tools and files required for programming and downloading software
for the VMM3120.

Note:

With the exception of the PC and desktop power supply, all materials

and software are available from Parker Vansco. Please consult your Parker
Vansco Account Representative for specific details and pricing information.

2.3. Install the Required Software Tools

Before using the VMM3120 multiplexing module, install the following software
tools onto your PC:



Data Link Adapter (DLA) drivers



The DLA acts as the interface between the PC and the VMM3120. Before
using the DLA, you must install the DLA drivers.



Parker Vansco Software Tools



Parker Vansco provides the VMMS software tool to create and download
software for the VMM3120 multiplexing module. Contact your Parker
Vansco Account Representative, or visit the Parker website to get further
information on how obtain a product key.

2.3.1. Install the Data Link Adapter Driver Software

A Data Link Adapter (DLA) is needed when connecting the VMM3120
multiplexing module in a development system.

Note:

Parker Vansco provides the latest DLA software releases through its

web site. Please contact your Parker Vansco Account Representative for
details on how to download the latest DLA driver software.

The Parker Vansco DLA requires the installation of drivers on your PC. To install
the Parker Vansco DLA drivers:

Download the driver, run the extracted file, and follow the Install Wizard. Do
not connect the USB-DLA until the driver installation is completed.

Connect the USB-DLA to a USB port on your PC. The Found New Hardware
screen opens.

Select

Install the software automatically (Recommended)

, and then click

Next

. If the driver is not detected automatically, you can browse to the folder

containing the driver.

After installation is finished, click

Finish

. The USB-DLA is now recognized

and ready to be used.

See the Parker Vansco USB-DLA kit user manual for more detailed instructions.

Содержание VMM3120





























































































Результаты поиска

Содержание VMM3120

Отзывы:

Похожие инструкции для VMM3120

Бренды по названию

Популярные бренды

Vansco VMM3120, Руководство пользователя

Результаты поиска

Содержание VMM3120

Отзывы:

Похожие инструкции для VMM3120

Бренды по названию

Популярные бренды