Vanox LYRA VZB28BN, Руководство по эксплуатации

Страница: 5 / 30

Introduction
Thank You for choosing a VANOX VZB28BN Fireplace
About the VZB28BN / VRI28BN Fireplace
The VZB28BN includes a 18,000 BTU Linear burner. The
VZB28BN is certified in Canada and USA as a Vented Gas
Fireplace (ANSI Z21.50 -2016 / CSA 2.22 -2016) and is avail-
able in two versions.
• VZB28BN ; Zero clearance 4”,5”,6” B-Vent gas Fireplace,
(Millivolt Ignition)
• VZB28BNE ; Zero clearance 4”,5”,6” B-Vent gas Fireplace,
(IPI Ignition)
• VRI28BN ; Retrofit Insert to be used on all Montigo EP28
Series 4”, and 5” B-Vent gas Fireplace, (Millivolt Ignition)
• VRI28BNE ; Retrofit Insert to be used on all Montigo EP28
Series 4”, and 5” B-Vent gas Fireplace, (IPI Electronic Igni -
tion) (Installation details on page 13)
How to use this manual:
This manual covers all models and unless otherwise speci-
fied, the designation VZB28BN refers to all models. Sections
which are specific to a particular model are marked with a
symbol, plus the appropriate model number.
Warranty and Installation Information:
The Vanox warranty will be voided by, and Vanox disclaims
any responsibility for, the following actions:
• Modification of the fireplace and/or components includ -
ing glass doors.
• Use of any component part not manufactured or ap -
proved by Vanox in combination with this Vanox fireplace
system.
• Installation other than as instructed in this manual.
Consult your local Gas Inspection Branch on installation
requirements for factory-built gas fireplaces. Installation &
repairs should be done by a qualified contractor.
Installations in Canada must conform to the current CAN/
CGA B149.1 and .2 Gas Installation Code and local regula-
tions.
• Installation in the USA must conform to local codes, or in
the absence of those codes, conform to the National Fuel
gas Code, ANSI 2223.1 / NFPA54.
Before you Start
IMPORTANT MESSAGE: SAVE THESE INSTRUCTIONS
The VZB28BN or VRI28BN B- Vent fireplace must be in-
stalled in accordance with these Instructions. Carefully read
all the Instructions in this manual first. Consult the Local
Gas Branch to determine the need for a permit prior to
starting the installation. It is the responsibility of the install-
er to ensure this fireplace is installed in compliance with
the manufacturers instructions and all applicable codes.
Installation
Part. No.
VZB28BN-Man-101817-A
VZB28BN Gas Fireplace VANOX Fireplace Inc.
Page 5