This SOP does not necessarily cover all possible hazards associated with the plant and should be used in conjunction with
other references
–
This SOP remains the property of Traffic and Access Solutions Pty Ltd
–
PORTABOOM® brand and designs
are registered trademarks of Traffic & Access Solutions Pty Ltd ABN 162 894 975
Safety glasses must be worn at all
times in work areas.
Gloves must be worn at all times when
handling equipment.
Steel cap boots must be worn at all
times in work areas.
Hard hat must be worn at all times
while working.
PRE-OPERATIONAL SAFETY CHECKS
1.
Ensure that the PORTABOOM® PRE-START inspection checklist is completed prior to utilisation,
PORTABOOM® must be in a safe and working condition prior to use.
2.
Faulty equipment must not be used. Immediately report suspect equipment to your Supervisor.
PORTABOOM® SITE OPERATIONAL INSTRUCTIONS
One operator operating one PORTABOOM®:
1.
Park vehicle / trailer used to transport PORTABOOM® at setup location on as close to level
ground as possible.
2.
Unload PORTABOOM® Tower using safe manual handling techniques including straight
back and bending at the knees.
3.
Must be inside an existing TTM worksite.
4.
Must be positioned so they are clear of any moving or operating plant and/or machinery.
5.
Must not undertake any other task or work activity whilst in control of the PORTABOOM
units.
6.
It is recommended that the PORTABOOM® operator is not further than 75mtrs from the
PORTABOOM® Tower.
7.
Must have a visual of 120m on the approach to the PORTABOOM® Tower you are
operating.
8.
Must be ready and in position to invoke manual or STOP/SLOW operation if required.
PORTABOOM® must not be operated unless it is in a safe condition for use.
DO NOT use this unless you have reviewed & understand this procedure.
