![Vanguard Firewerks VTDMV24NA Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/vanguard/firewerks-vtdmv24na/firewerks-vtdmv24na_owners-operation-and-installation-manual_3484079017.webp)
www.desatech.com
114926-01C
17
SPECIFICATIONS
This appliance has been design certified to
ANSI ZZ1.60-2003
and
CSA 2.26-2003 Decorative Gas
Appliances for Installation in Solid Fuel Burning Fireplaces
by OMNI Test Laboratories.
Purchase these appliances from your local dealer.
If they can not supply these accessories, call DESA
at 1-866-672-6040 for referral information. You
can also write to the address listed on the back
page of this manual.
EQUIPMENT SHUTOFF VALVE
GA5010
Equipment shutoff valve with 1/8" NPT tap. Fits
1/2" pipe.
FIREPLACE HOOD
Black - GA6050
Brass - GA6052
Antique Brass - GA6053
Helps deflect heat away from mantel or wall above
fireplace. Fits opening 28" to 48" wide.
DAMPER CLAMP - GA6080
(Not Shown)
Permanently opens chimney flue damper for
vented operation.
RECEIVER AND HAND-HELD
REMOTE CONTROL KIT - HRC100
Allows the gas log heater to be turned on and off
using a hand-held remote control. A wall-mount
docking station is included.
CLEANING KIT - GCK
(Not Shown)
Your vented gas appliance requires regular cleaning
and maintenance to prevent performance problems.
This kit gives you the tools and instructions to make
it easy to clean all critical areas of your appliance.
ACCESSORIES
LAVA ROCK - GA6060
(Not Shown)
Order when additional rock is desired (1.8 lb. bag).
WIRING DIAGRAM
When Using Remote
Thermopile
To Remote
Receiver
VTDMV18NA AND VTDMV24NA
• Variable Rating: 36,000/53,000 Btu/hr
• Gas Type: Natural Gas Only
• Ignition: Piezo
• Manifold Pressure: 3.5" W.C.
• Inlet Gas Pressure (in. of water):
Maximum - 10.5", Minimum* - 5.0"
* For purpose of input adjustment
VTDMV18PA AND VTDMV24PA
• Variable Rating: 35,000/45,000 Btu/hr
• Gas Type: Propane/LP Gas Only
• Ignition: Piezo
• Manifold Pressure: 10" W.C.
• Inlet Gas Pressure (in. of water):
Maximum - 14", Minimum* - 11"
* For purpose of input adjustment