EZCT-2000 USER’S MANUAL
REV 3
34
3.5.2. Printing a Directory of Test Plans Stored in the EZCT-2000’s Memory
You can print a directory of all the test plans stored in the EZCT-2000’s Flash EEPROM using the
steps below:
a.
Start from the “START-UP” menu:
Press the
[3]
key (
TEST PLANS
).
b.
The following screen will be displayed:
Press the
[3]
key (
PLAN DIRECTORY
).
c.
The following screen will be displayed while the test plan directory is printed on the
thermal printer:
You will be automatically returned to the “START-UP” menu after the directory printing
is finished. A typical Flash EEPROM test plan directory printout is shown in Figure 10.
PRINTING DIRECTORY
1.
LOAD TEST PLAN
2.
UNLOAD TEST PLAN
3.
PLAN DIRECTORY
4.
NEXT PAGE
1.
RUN TEST 09/24/09
2.
SETUP 08:20:19
3.
TEST PLANS
4.
DIAGNOSTIC
Содержание EZCT-2000
Страница 25: ...REV 3 EZCT 2000 USER S MANUAL 21 Figure 6 Typical EZCT 2000 Tabulated Report Printout ...
Страница 33: ...REV 3 EZCT 2000 USER S MANUAL 29 Figure 9 Typical Internal Test Record Directory Printout ...
Страница 39: ...REV 3 EZCT 2000 USER S MANUAL 35 Figure 10 Typical EZCT 2000 Flash EEPROM Test Plan Directory Printout ...
