USER MANUAL
24PCS OUTDOOR LED WALL WASH LIGHT
and packing. Please check the packing list as below:
LED Wall Wash Light-------- 1pc
User Manual ----------------- 1pc
Ⅱ
. SAFETY WARNING
Every person involved with the installation, operation and maintenance of this device has to
know:
1). This product must be installed by a qualified professional;
2). This product left the place of manufacture in perfect condition. In order to maintain this
condition and for safe operation, the user must always follow the instructions and safety
warnings described in this user manual;
3). Manufacturer will not with responsibility for those operations not according to this
Instruction.
Ⅲ
. OPERATION ATTENTION
·
Do not connect power cable of other electric products with this unit;
·
Do not connect DMX512 Signal cable of other electric products with this unit;
·
Always make sure that you are connecting to the proper voltage, and that the line voltage
you are connecting to is not higher than that stated on the decal or rear panel of the fixture;
·
Always ground (earth) the fixture electrically;
·
During long periods of non-use, disconnect the unit’s main power;
·
Do not attempt to operate this unit if the power cord has been frayed or broken;
·
There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself;
·
Maximum ambient temperature (Ta) is 35°C. Do not operate fixture at temperatures
higher than this;
·
The surface temperature of the light can reach to 65° C, cool down at least before you
operate the light;
·
The minimum distance between light-output and the illuminated surface must be more
than 1 meters. Keep all combustible materials (for example fabric, wood, paper) at least 0.5
meters away from the fixture;
·
Avoid looking directly into the light source (especially those who suffer from epileptic
fits);
·
Always mount this unit in safe and stable matter;
·
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices;
·
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable;
·
Block access below the work area whenever installing or removing the fixture.
·
Avoiding hit the Light when you are move or install the light;
·
If the exterior cord of the fixture is damaged, it must be replaced by manufactory, agent
or a qualified technician.
Ⅳ
PRODUCT MAIN FEATURES
6 DMX channel mode optional, with digital tube display and four control buttons;
DMX-512, Master/slave control mode;
IP65 rating;
With strobe function;
Long LED lifespan can reach to 50,000hours;
High efficiency, electricity saving, low heat;
Standard DMX-512 communication protocol;
03
02
