5
3. Maintenance
Risk of electric shock. Before performing any maintenance or servicing, always
disconnect the unit from its power source.
Sharp edges may be present. When cleaning the unit, it is recommended to wear
safety glasses and gloves.
3.1 Quarterly Maintenance
WARNING
!
VD0244
1
2
1) Core
2) Core filters
Refer to illustration at right to identify the inner parts of
your unit.
1. Unplug the unit.
2. Remove the unit door by following
these
steps:
A. Remove both door bottom machine
screws no. 8-32 x 1” (
1
) and set
aside.
B.
Open
(
2
) and lift out the door (
3
).
VO0191
A
B
1
2
3
3. Slide out both filters (
1
) and recovery core (
2
)
from the unit.
4. Clean the inside walls of the unit with a clean
damp cloth, then wipe with a clean dry one.
5. Remove dust on filters and on core using a
vacuum cleaner and a soft brush attachment.
6. Wash both core filters under lukewarm water
with mild soap. Rinse thoroughly and let dry
completely before reinstalling on the core.
7. Slide the core and the cleaned filters into the unit.
8. Reinstall the door. Secure it with both mechanical screws no. 8-32 x 1” previously
removed and plug the unit.
NOTE: The unit will return to its previous setting after a 30-second delay for boot
sequence.
VD0243
1
2
CAUTION
Follow the instructions on the core label to
reinstall it correctly.
