background image

V&P Scientific, Inc.  

Technical Note 349 03/06/18 

Do not for any reason open the Controller enclosure or the heating element compartment of the 
Heating Block.  This will void the warranty. 

For any other questions regarding the Controller, please refer to the Control Instructions (Appendix). 

If technical assistance is required, contact: 

V&P Scientific, Inc.  

 

 

 

9823 Pacific Heights Blvd., Suite T 

 

 

 

San Diego, CA 92121 

 

 

 

Ph:   858-455-0643 

 

 

 

Fax: 858- 455-0703 

 

 

 

[email protected] 

 

WARRANTY

 

V&P  Scientific,  Inc.  warrants  this  product  to  be  free  from  defects  in  material  and  workmanship  when 
used  under  normal  laboratory  conditions  for  one  year.    This  warranty  begins  on  the  date  of  delivery 
from V&P Scientific. 
 
In  the  event  this  product  fails  under  normal  laboratory  conditions  within  the  specified  period  of  time 
because of a defect in material or workmanship, V&P Scientific will, at its option, repair or replace the 
product.  Damage to the product caused by user negligence is not covered.   
 
Please keep the special shipping carton in case the unit needs to be shipped back to V&P Scientific.  
Please contact V&P Scientific at the above address for return authorization and shipping instructions. 

 

This  warranty  is  made  in  lieu  of  other  warranties  expressed  or  implied  including  the  warranties  of 
merchantability  and  fitness  for  a  particular  purpose.    V&P  Scientific  shall  not  be  liable  for  loss  or 
damages arising from the use of these products nor for consequential damages of any kind. 
 

Содержание VP 741GA Series

Страница 1: ...email sales vp scientific com TECHNICAL NOTE 349 OPERATION MANUAL FOR VP 741GA SERIES HEATING BLOCKS Figure 1 VP 741GA Heating Block with Controller Figure 2 Front Face of Controller left with Power Cable plugged in Bottom of Heating Block showing a polypropylene SBS base for registration ...

Страница 2: ...hat is clear of heat sensitive items such as paper or equipment or heat conducting material 2 Connect power cord into the power receptacle on the front of the Controller Connect the power cord to a 120 V outlet OPERATION HEATING BLOCK OPERATION USING THE CONTROLLER 1 Turn on the Controller using the on off power switch The red number in the upper display is the current temperature of the Heating B...

Страница 3: ...p vp sci com products heating cooling heatblock inserts html 5 The upper limit temperature on the Controller is set to 150o C at the factory Temperatures higher than 120o C should not be used with polypropylene tubes or microwell plates Polypropylene will melt at temperatures greater than 130o C To operate at temperatures above 120o C use of glass or other high temperature stable containers is rec...

Страница 4: ...s warranty begins on the date of delivery from V P Scientific In the event this product fails under normal laboratory conditions within the specified period of time because of a defect in material or workmanship V P Scientific will at its option repair or replace the product Damage to the product caused by user negligence is not covered Please keep the special shipping carton in case the unit need...

Отзывы: