V&P Scientific, Inc.
7
Technical Note 115A
4.
Aspirate two separate 50-100 ml aliquots of 100% alcohol (methanol, ethanol or
isopropyl alcohol) through the Manifold. Tip the system back and forth to ensure all
the alcohol is removed.
5.
Pull air through the Manifold for 1- 2 minutes by leaving the vacuum on and shut-off
valve open.
6.
Store in a clean dry area.
7.
To autoclave, simply place the entire system into the autoclave. It is not necessary to
remove any parts
WARRANTY
V&P Scientific, Inc. warrants this product to be free from defects in material and
workmanship when used under normal laboratory conditions for one year. This warranty
begins from the date of delivery by V&P Scientific.
In the event this product fails under normal laboratory conditions within the specified
period of time because of a defect in material or workmanship, V&P Scientific will, at its
option, repair or replace the product. Damage to the product caused by user negligence is
not covered.
Please keep the special shipping carton in case the unit needs to be shipped back to V&P
Scientific. Please contact V&P Scientific at the address below for return authorization and
shipping instructions.
This warranty is made in lieu of other warranties expressed or implied including the
warranties of merchantability and fitness for a particular purpose. V&P Scientific shall not
be liable for loss or damages arising from the use of these products nor for consequential
damages of any kind.
If assistance is required, contact V&P Scientific, Inc. 858-455-0643 or
