© Vanderbilt 2017
11
2.2.3
Speed Dome Installation
•
Please remove the protective film on the lower dome after the installation is finished.
•
Do not touch the bubble of the lower dome directly by hand. The image blurs otherwise.
•
Fit the safety rope properly during the installation of the dome to avoid the dome falling down during
installation or during normal operation.
Steps:
1.
Hook the two ends of the safety rope to the back box of the speed dome and the bracket respectively. Route
the cables through the bracket as shown below.
Safety Rope
Figure 2-6 Safety Rope
2.
Loosen the lock screws on the bracket as shown below.
3.
Align the speed dome with bracket and rotate it counterclockwise or clockwise to the bracket tightly as shown
below.
