© Vanderbilt 2017
15
3.4
Activation via Eventys IP Search Tool
Eventys IP Search Tool software is used for detecting the online device, activating the camera, and resetting the
password.
Get the software from the supplied disk or the official website, and install the tool according to the prompts. Follow
the steps to activate the camera, please refer to the User Manual of Network Camera for other activation methods.
Steps:
1.
Run the Eventys IP Search Tool to search the online devices.
2.
Check the device status from the device list, and select the inactive device.
Figure 3-3 Eventys IP Search Tool Interface
Note:
The Eventys IP Search Tool software supports activating the camera in batch. Please refer to the User Manual of
Eventys IP Search Tool for details.
3.
Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED
– We highly recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can better protect your
product.
4.
Click
OK
to save the password.
You can check whether the activation is completed on the popup window. If activation failed, please make
sure that the password meets the requirement and try again.
