www.vanco1.com
800-626-6445
16
NETWORK SETTINGS AND
ADVANCED SETTINGS
There are four modes for serial-network conversion:
TCP Server
In this mode, the RS232-IP is on a specified port, waiting for a TCP/IP Client connection. When connected, all TCP/IP
data is sent directly to the serial port end, and the data of the serial end is sent to TCP Client end.
TCP Client
In this mode, the module is connected to a specified domain or IP port. All of the data sent from the TCP Server-side
end will be sent directly to the serial port, and the data from the serial end will be sent to the TCP Server-side.
NOTE: When the TCP Active reconnection function is enabled, and the TCP Server initiative is disconnected, the
module will immediately take the initiative to reconnect. Otherwise the module will not automatically reconnect. (See
Advanced Settings).
