www.vanco1.com
800-626-6445
6
PANEL DESCRIPTIONS
RECEIVER
1. Antennas
2. RF Channels (Selectable 0-9 to “marry” to Transmitting unit; other Receivers can be set to the same RF
channel to split signal)
3. Channel Toggle Switch (will change RF Channels 0-9 sequentially)
4. IR Sensor (for included remote to change to RF channels remotely)
5. Reset Button
6. DC 5V Power Supply Port
7. Signal Status Indicator (Solid Green for successful signal when connected to source)
8. Syncing Status (Blinking Green when connected to Receiving unit; Solid Green will appear if no connection
to Receiver)
9. HDMI OUTPUT (Connect to an HDMI display)
10. IR IN (Connect included IR Receiver (RX) and place near or at display for IR control)
1
6
7
8
10
1
2
3
5
4
9
